Opetation
Pre-ride Inspection
Warning If the Pre-ride Inspection is not performed, severe personal injury or vehicle damage may result.
Inspect your motorcycle every day before you ride it. The items listed here will only take a few minutes to inspect, and in the long run they can save time, expense, and possibly your life.
Engine oil level — add engine oil if required [see page]. Check for leaks.
Fuel level — fill fuel tank when necessary [see page and scroll]. Check for leaks.
Coolant level — add coolant if required [see page]. Check for leaks.
Front and rear brakes — check operation; make sure there is no brake fluid leakage [see page].
Tyres — check condition and pressure [see page].
Drive chain —check condition and slack [see page]. Adjust and lubricate if necessary.
Throttle — check for smooth opening and full closing in all steering positions.
Lights and horn — check that headlight, tail/brake light, turn signals, indicators and horn function properly.
Engine stop switch — check for proper function [see page].
Battery electrolyte — check the level and add if necessary [see page].
Side stand ignition cut-off system — check for proper function [see page].
Correct any discrepancy before you ride. Contact your authorized Honda dealer for assistance if you cannot correct the problem.
Last updated